grimmspeed employee build arts subaru forester xt

Employee Build: Art’s 2004 Subaru Forester XT (Part 2)

Some of you may have experienced the harsh downturn in weather in the past month or so, especially if you reside anywhere in the Midwest. For those of you lucky enough to be unfamiliar with such things, I’m talking about the kind of temperatures that a few pairs of sweat pants, two hoodies, a jumpsuit, and winter coat can’t combat. This brings me to talk about the workspace I had mentioned in my first post. It’s not as much of the dream garage that I had envisioned when I first started looking at buying a house a few years back, but it’s what I could afford at the time, so I had to get realistic. Dark, cold, and wet would all be apt adjectives to describe it, one could say it’s the type of garage that makes Guantanamo look cozy. It does have some redeeming qualities however; it’s got a roof, a concrete floor, and a couple of walls, so as far as I’m concerned it’s tuner paradise. While working on my projects I try to keep in mind that where you build your car is only a fraction of what the finished product will be, so when I encounter somebody that’s adamant that worthwhile builds can’t be done in modest accommodations I tend to disagree. That being said, I do plan on improving the space with some proper insulation, heating, and lighting at some point.

IMG_9556

The silver lining is that these past bitterly-cold weeks have given me a chance to further plan out the next couple of month’s worth of work and parts ordering.  I’ve narrowed down my driver’s side seat choice to either the Sparco Evo I/II or the Cusco Bride Zeta III. I’ve had a chance to start assessing what worn out parts need to be replaced, plan out the brake upgrades accordingly, and had time to expand on some of the ideas I’ve had for the car before I got my hands dirty. I’ve started mulling over wheel choices, but it’s been a major toss-up for me since 5×100 options with a decent offset are fairly limited. I’ve been lucky enough to test-fit a few wheels courtesy of my Subaru friends, but the search continues for now. Here is a set of Enkei NTO3’s that I threw on, a rim I’ve coveted for years:

subaru forester xt build grimmspeed employee

I did also have a chance to start digging into the front end of the car, my plan being to pull things off that I can work on in the warmth of my basement (which I’ll showcase in the next post). This gave me the opportunity to start fitting the 06/07 style STI lip, getting to work on the DIY grill, cleaning up the practically-opaque headlights/fog lights, and replacing the laughable amount of broken or missing clips that contributed to the old lady-esque bumper sag that’s been haunting me…

IMG_0128

Another area of the Forester, and most Subarus if I’m being honest, that had to be addressed was the awful blocky side mirrors. Since there was really nothing on the market that I liked, I decided to use a bit of drift-culture inspiration and adapt a set of 240sx Ganador-style mirrors. I imagine they’re not everyone’s cup of tea, but to me it adds a certain sleekness to the look of the old toaster-box. What do you guys think?

IMG_4335

As I touched on in my last post, upgrading the brakes is something I’ve definitely been looking forward to. In lieu of sourcing used STI Brembos, I decided to try out the Cadillac ATS Front Brembo Conversion Kit. I liked the aspect of being able to buy a brand new set of calipers for frankly, a cheap price. A bit of drilling and tapping later to accommodate for the new bracket and I was happy with the fit and look. As a bonus I found the passenger side ABS wire had been guillotined in half by my suspension, explaining the dashlight that’s been on all season. After some test-fitting with the eventual wheels I end up with, I’ll be pulling the calipers right back off for a bit of powdercoating alongside a pair of Legacy 2-pot rears. A new set of stainless lines, upgraded pads/rotors and the GrimmSpeed Master Cylinder Brace I’ve already got equipped will cap things off nicely in the stopping department.

(Please don’t ask how long I spent trying to pull the rear passenger rotor off before realizing the handbrake was still on).

IMG_9991

(http://www.ctsvbrakeswap.com/subaru-kits/frs-brz-gt-86-4-piston-ats-caliper-bracket-kit)

I’ve also be tearing apart the underside of the car in preparation for a bit of new-parts TLC. As expected my ball joints sound like maracas when the knuckle assembly is shaken and my wheel bearings are all but toast. Along with some fresh replacements I’ll be upgrading the rear arms and bushings all around in addition to a beefier sway bar setup for the front and rear. I’ve been making a long list of Whiteline parts to throw at the car so those should be inbound soon.

There’s still a long way to go, but so far it’s been a blast to get back to work on this thing. As promised in my last post, I’ll end things with a list of current mods:

Engine

  • GrimmSpeed Hood Splitter
  • GrimmSpeed Hood Struts
  • GrimmSpeed Limited Battery Tiedown
  • GrimmSpeed Modified Radiator Cover
  • GrimmSpeed Alternator Shroud
  • GrimmSpeed AOS
  • GrimmSpeed Lightweight Pulley
  • GrimmSpeed 3-Port Electronic Boost Controller
  • Cobb Accessport V2
  • Forced Performance 71HTA 64mm Turbo
  • IAG Oil Lines
  • GrimmSpeed 38mm EWG Coated Up Pipe
  • GrimmSpeed 3’’, Divorced, Limited, Wrapped Downpipe
  • Turbo XS 3’’ Catback
  • PnP’d, Wrapped Exhaust Manifold with GrimmSpeed Coated Cross-pipe
  • PnP’d, Coated Intake Manifold
  • Coated TGV Deletes
  • 8mm GrimmSpeed Phenolic Spacers
  • Injector Dynamics 1000cc Injectors, lines, rails (top feed conversion), stock FPR
  • Deatschwerks 300 Fuel Pump
  • TurboSmart Comp-Gate40 EWG (14PSI)
  • GrimmSpeed Coated TMIC
  • GrimmSpeed First Gen. Y-Pipe Kit
  • JDM STI BPV
  • Silicone Turbo Inlet 2.5-3’’
  • Injen 3’’ CAI w/GS Oiled Cone Filter, stock MAF
  • Perrin 4 Bar MAP

Suspension

  • Fortune Auto Coilovers w/Swift Springs, Radial Bearings, Rear Camber Plates

Exterior

  • STI Sideskirt Lips
  • GrimmSpeed License Plate Delete
  • Importology Front Lip w/V7 STI Lip
  • JDM STI Hood Scoop
  • USDM Rear Spoiler
  • 30% Tint
  • Drag DR31 17×9 +38 Rims with 235/45/17 Continental  Extreme Contact DW tires
  • Muteki Close-ended Lugnuts

Interior

  • GrimmSpeed Delrin Shift Knob
  • Gauges: AEM AFR/Boost Wideband, AEM Oil Pressure in custom pod
  • 2007 STI Steering Wheel
  • Touge Factory Race Seat w/Buddy Club Rail

Leave a Reply

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *